Legend™ Premium Heat Shrink
Legend™ Premium heat shrink is manufactured to offer a consistently high grade heatshrink solution. It has a 3:1 shrink ratio that means each size covers a wider range of cable diameters. It is also specially designed to have a lower shrink temperature, which in turn saves time when shrinking onto the cable.
This label has been successfully tested for High/Low Temperature, Salt Mist Spray according to Lloyds Register Type Approval System. Although not designed as an external label, it has also been successfully tested for 3000 hours accelerated UV ageing.
For full information on testing please refer to Product Datasheet.
Print via Fox-in-a-Box® thermal printer using One software, One printer, One ribbon for our complete range of thermal labels. On software choose length of label 10mm – 100mm. With Advanced and Professional levels run 2 rolls at a time. With Professional level print both ends at the same time. Running 2 rolls, A 300m thermal ribbon will yield approximately 23,000 x 25mm labels.
TIP – TIME INTO PROFIT
PRINT 2 ROLLS AT THE SAME TIME Save time, print 2 rolls at once with the Advanced and Professional levels. FONT SIZE We are often asked whether the print will shrink when the tubing shrinks. Like all heatshrink, yes it does. Suggested ways to minimize the reduction in print size:
- Shrink the tubing from the reverse side to the printing
- Some customers also advise using a font like Arial Narrow
For more information call our Sales Team on +44 (0)1707 37 37 27 or email email@example.com
PRODUCT CODES EXPLAINED
|Material:||Flame retardant single wall matt polyolefin|
|Minimum shrink temperature:||90°C (194°F) – fully recovered|
|Operating temperature:||-55°C to 135°C (-67°F to 275°F)|
|Dialectic strength:||≥ 37kV/mm|
|Standards:||UL 224 125°C (257°F) 600V VW-1 (File No. E48762)
CSA C 22.2 No. 198.1: 125°C (257°F) 600V VW-1
|Printing:||Print with the Silver Fox DTP-1 300 dpi thermal printer|