Legend™ 2-Part Laser Labels
Labels supplied pre-cut as part of A4 sheets, designed to run through a standard office laser printer. No special equipment required.
The key benefit of the 2 part system is that the wire ID can be changed even after termination without cutting off the wire.
The system consists of a clear plastic tubing with 2 recesses: one for the label and one for the wire. The label recess remains same size. The wire recess changes according to diameter of wire to be marked . Diameter range: 1.2mm – 14mm. There are 3 different label lengths; 20mm, 30mm and 50mm with matching lengths of clear tubing.
The flexible polyester label has a special “bottle” shape allowing it to be pulled into the clear tubing, this style makes it quick and easy to ‘load/unload’ label.
Typical uses include; sub-stations, control rooms or any application where the ID is likely to need frequent changes.
This label has been tested for High/Low Temperature and Salt Mist Spray according to Lloyds Register Type Approval System.
For a full list of tests please see Product Datasheet.
Also, consider colour laser printer in conjunction with Advanced/Professional levels of software for producing colour font/background or Resistor Colour-Coding.
Labacus® Innovator Lite/Basic/Advanced/Professional & Professional Satellite (for distant site printing of Professional output).
Download free trials of Basic/Advanced/Professional with our entry level FOC Lite software.
Print using ordinary office laser printer or colour laser for colour options.
TIP – TIME INTO PROFIT
- There is no software/printer limitation on the number of characters, choose label length that best suits your needs for readability. A 50mm length of
labelis available with matching clear mounting tubing.
- During the project, even after fitting label, do not remove the narrow tail, this makes it even easier to change as required. Remove tail on completion of the project.
PRODUCT CODES EXPLAINED
|Printing:||Laser Printers Only|